Ingress Requirements

Ingress configuration for Keeper Automator

Keeper Automator can be deployed many different ways - on prem, cloud or serverless.

Important: The Keeper Automator service must be deployed with the recommended inbound firewall rules to ensure that all inbound traffic is restricted to Keeper's infrastructure.

Data Flow Diagram

Data Flow Diagram

Network Firewall Setup

In your firewall inbound traffic rules, set one of following rulesets:

For US Data Center Customers:

• Inbound TCP port 443 from 54.208.20.102/32
• Inbound TCP port 443 from 34.203.159.189/32

US / GovCloud Data Center Customers:

• Inbound TCP port 443 from 18.252.135.74/32
• Inbound TCP port 443 from 18.253.212.59/32

For EU / Dublin Data Center Customers:

• Inbound TCP port 443 from 52.210.163.45/32
• Inbound TCP port 443 from 54.246.185.95/32

For AU / Sydney Data Center Customers:

• Inbound TCP port 443 from 3.106.40.41/32
• Inbound TCP port 443 from 54.206.208.132/32

For CA / Canada Data Center Customers:

• Inbound TCP port 443 from 35.182.216.11/32
• Inbound TCP port 443 from 15.223.136.134/32

For JP / Tokyo Data Center Customers:

• Inbound TCP port 443 from 54.150.11.204/32
• Inbound TCP port 443 from 52.68.53.105/32

In addition, you may want to allow traffic from your office network (for the purpose of testing and health checks).

Make sure to create a rule for each IP address listed based on your Keeper geographic data center region.